您所在的位置：首页 > 技术资料
EL7232C的技术资料
EL7232C的技术资料
来源：
思达思科电子技术有限公司
发布日期：2009/4/21 19:55:11
EL7232C的产品特征：
●3-State output
●3V and 5V input compatible
● Clocking speeds up to 10 MHz
● 20 ns Switching/delay time
● 2A Peak drive
● Low, matched output impedanceÐ5X
● Low quiescent currentÐ2.5 mA
● Wide operating voltageÐ 4.5V--16V
EL7232C的技术参数：
Supply (Va to Gnd) 16.5V
Input Pins -0.3V to a0.3V above Va
Combined Peak Output Current 4A
Storage Temperature Range -65℃ to a150℃
Ambient Operating Temperature -40℃ to a85℃
Operating Junction Temperature 125℃
Power Dissipation
SOIC 570 mW
PDIP 1050 mW
Important Note:
All parameters having Min/Max specifications are guaranteed. The Test Level column indicates the specific device testing actually performed during production and Quality inspection. Elantec performs most electrical tests using modern high-speed automatic test equipment, specifically the LTX77 Series system. Unless otherwise noted, all tests are pulsed tests, therefore TJ=TC=TA.
Test Level est Procedure
I 100% production tested and QA sample tested per QA test plan QCX0002.
II 100% production tested at TA e 25℃ and QA sample tested at TA e 25℃ ,
TMAX and TMIN per QA test plan QCX0002.
III QA sample tested per QA test plan QCX0002.
IV Parameter is guaranteed (but not tested) by Design and Characterization Data.
V Parameter is typical value at TA e 25℃ for information purposes only.
EL7232C的产品描述：
The EL7232C 3-state drivers are particularly well suited for ATE and microprocessor based applications. The low quiescent power dissipation makes this part attractive in battery applications. The 2A peak drive capability, makes the EL7232C an excellent choice when driving high speed capacitive lines, as well. The input circuitry provides level shifting from TTL levels to the supply rails. The EL7232C is available in 8-pin P-DIP and 8-lead SO packages.
●3-State output
●3V and 5V input compatible
● Clocking speeds up to 10 MHz
● 20 ns Switching/delay time
● 2A Peak drive
● Low, matched output impedanceÐ5X
● Low quiescent currentÐ2.5 mA
● Wide operating voltageÐ 4.5V--16V
EL7232C的技术参数：
Supply (Va to Gnd) 16.5V
Input Pins -0.3V to a0.3V above Va
Combined Peak Output Current 4A
Storage Temperature Range -65℃ to a150℃
Ambient Operating Temperature -40℃ to a85℃
Operating Junction Temperature 125℃
Power Dissipation
SOIC 570 mW
PDIP 1050 mW
Important Note:
All parameters having Min/Max specifications are guaranteed. The Test Level column indicates the specific device testing actually performed during production and Quality inspection. Elantec performs most electrical tests using modern high-speed automatic test equipment, specifically the LTX77 Series system. Unless otherwise noted, all tests are pulsed tests, therefore TJ=TC=TA.
Test Level est Procedure
I 100% production tested and QA sample tested per QA test plan QCX0002.
II 100% production tested at TA e 25℃ and QA sample tested at TA e 25℃ ,
TMAX and TMIN per QA test plan QCX0002.
III QA sample tested per QA test plan QCX0002.
IV Parameter is guaranteed (but not tested) by Design and Characterization Data.
V Parameter is typical value at TA e 25℃ for information purposes only.
EL7232C的产品描述：
The EL7232C 3-state drivers are particularly well suited for ATE and microprocessor based applications. The low quiescent power dissipation makes this part attractive in battery applications. The 2A peak drive capability, makes the EL7232C an excellent choice when driving high speed capacitive lines, as well. The input circuitry provides level shifting from TTL levels to the supply rails. The EL7232C is available in 8-pin P-DIP and 8-lead SO packages.
